Omega Vehicle Security HH-21 Instrukcja Użytkownika Strona 9

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 31
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 8
7
WARNING
Do not substitute a metal part for the nylon screw in the
rear case. Doing so will degrade electrical isolation of the
case.
WARNING
The battery is accessible through a cover on the back of
the instrument. To avoid electrical shock hazard, discon-
nect all temperature probes and sensors and turn the unit
off before removing the cover.
WARNING
Never use this instrument or any probe or sensor inside a
microwave oven.
CAUTION
Avoid making sharp bends in probe or sensor lead wires.
Bending lead wires at a sharp angle can damage the wire
causing probe failure.
CAUTION
When using both thermometer inputs, and a voltage differ-
ential exists between the two measurement points, at least
one probe should be electrically insulated. If not, ground-
loop current can flow through the thermocouple leads
causing measurement error or instrument damage.
Przeglądanie stron 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Komentarze do niniejszej Instrukcji

Brak uwag